Quick Answer: What Is R Factor Insulation?

What is the R value of 6 insulation?

Fiberglass Insulation Batts Fiberglass blankets or rolls provide an R-value of up to 3.2 per inch, so a 6-inch fiberglass batt may achieve an R-value of 19.2, and some high-performance products are rated at R-21..

How much better is r38 vs r30 insulation?

Example: R38 has a U of 1/R or 1/38=. 026 and R30 has a U of 1/30=. 033. So R38 is about 20% better.

How thick is r60 insulation?

17 inchesThe average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 4, the average minimum requirement for attic insulation is 11 inches of R38 fill.

How thick is r30 insulation?

8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck. Easy Installation R-30C EcoTouch® Thermal Batt insulation is easy to handle and install.

What does the R factor mean in insulation?

“R” means resistance to heat flow. The higher the R-value, the greater the insulating power. Almost all insulation products have to tell you their R-value — pipe and duct insulation are the only exceptions.

What is the best R value for insulation?

R-value (insulation)Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch. … Straw bales perform at about R-1.5 per inch.More items…

Is higher or lower R value better?

resistance to heat flow which means that the higher the product’s R-value, the better it is at insulating the home and improving energy efficiency. Adversely, U-value measures the rate of heat transfer. This means that products with a lower U-value will be more energy efficient.

What is the R value of 10 inches of insulation?

R-value of Materials and DepthsMaterialR-value/in10″Fiberglass (batt)3.1 – 3.431.0 – 34.0Fiberglass blown (attic)2.2 – 4.322.0 – 43.0Fiberglass blown (wall)3.7 – 4.337.0 – 43.032 more rows•Feb 6, 2013

How dangerous is insulation?

There is no evidence currently of long-term damage from inhaling fiberglass particles, and workers who come into regular contact with fiberglass insulation are not considered to be at any higher risk of lung and breathing problems, especially if they wear proper safety attire.

What is the thinnest insulation with the highest R value?

Aerogel insulation offers the highest R-value of any insulating material at less weight and thickness—ideal for construction, refineries, pipelines, and thin-gap thermal barriers.

What type of insulation is best?

FiberglassWhen it comes to the best insulation for walls, the insulation material can also impact the R-values needed for good energy efficiency. Fiberglass: Fiberglass is the most common insulation material. It’s made from fine glass fibers and is most often used in batts, rolls and loose-fill insulation.

What is the highest R value for 6 inch batt insulation?

Fiberglass Batt Insulation CharacteristicsThickness (inches)R-ValueCost (cents/sq. ft.)6 to 6 1/41927-345 1/4 (high density)2133-398 to 8 1/22537-458 (high density)3045-495 more rows